{"product_id":"concrete-overlay-self-leveling-polishable-cement-coating","title":"Concrete Overlay - Self Leveling Polishable Cement Coating","description":"\u003ch2\u003eConcrete Overlay - Self Leveling Polishable Cement Coating\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eFlat out the best polishable overlay available. SLP is a high performance, fast setting, self-leveling, cementitious overlayment designed for polishing applications. SLP quickly levels and maintains work-ability for up to 20 min, bonds well and produces a tough, long wearing surface. \u003cspan style=\"color: #00aaff;\"\u003e\u003cstrong\u003eSLP can be applied from 3\/8” to 2”\u003c\/strong\u003e\u003c\/span\u003e in a single lift and up to 4” if extended with a proper aggregate such as pea gravel. SLP is ready for light foot traffic in 3-4 hours, can accept floor coverings in 8-12 hours and can be polished in 24 hours. When ground and polished, SLP is designed to mimic the appearance of polished concrete. SLP excels as a floor repair patch and can be color matched to most existing concrete surfaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUnlike competing products, SLP is very easy to polish and less abusive to your diamonds, yet still provides a hard, non-shrink, polishable wear surface. SLP also does not portray the artificial surface look that other brands can do.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSLP Self Level Polish Overlay mix\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll-in-one mix design, just add water\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIndoor or outdoor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProprietary polymers formulated for excellent strength and bonding\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e15-20 min self level working time\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eNatural concrete mimic\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e50 lb. bags\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCoverage at 3\/8″ is 16 sq ft\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eYou can add up to 12lbs of your own aggregate (ie. special crushed glass, glow in the dark glass, etc).  Just note that as you add extra aggregate, the self-leveling properties of this SLP Overlay will decrease slightly.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff8000;\"\u003e\u003cstrong\u003eThis mix is also a great Concrete Countertop Mix, which can be demolded in hours (@ 4 hours is common) and from varying thickness of 1\/2\" up to 2\".\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSLP TECH DATA SHEET\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSLP SDS\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eSLP is a high performance, fast setting, self-leveling, cementitious overlayment designed for polishing applications. SLP quickly levels, bonds well, and produces a tough, long wearing surface.\u003c\/p\u003e\n\u003cp\u003eIt has a standard working time of 15-20 minutes which can be extended with an optional retarder.\u003c\/p\u003e\n\u003cp\u003eSLP can be applied from 3\/8” to 2” in a single lift and up to 4” if extended with a proper aggregate such as pea gravel. SLP is ready for light foot traffic in 3­4 hours, can accept floor coverings in 8­-12 hours and can be polished in 24 hours. \u003c\/p\u003e\n\u003cp\u003eWhen ground and polished, SLP is purposely designed to mimic the appearance of polished concrete more than other competing products. The speed of SLP allows it to excel as a floor repair patch and can be color matched to most existing concrete surfaces.\u003c\/p\u003e\n\u003cp\u003eRead data sheet for full instructions before beginning.\u003c\/p\u003e\n\u003ch3\u003eSURFACE PREP Self Leveling Polishable Cement Coating:\u003c\/h3\u003e\n\u003cp\u003eAll concrete substrates must be structurally sound and fully cured (28 days min). Clean the surface of any contaminates including dust, dirt, debris, paint, tar, wax, oil, grease, curing compounds or sealers.\u003c\/p\u003e\n\u003cp\u003eMechanically profile the surface by shot blasting, sandblasting, or scarifying. Surface profile should be to CSP2 to CSP5. Acid etching typically does not provide enough of a profile for proper bonding. Substrate and ambient temperatures should be between 50º and 85º before application. All existing expansion, and control joints as well as any moving cracks must be honored.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff8000;\"\u003e\u003cstrong\u003eSurfaces should be primed with FlexyBo Primer (sold here) and allowed to dry to “tacky” before proceeding (15-30 min). \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eMIXING Self Leveling Polishable Cement Coating:\u003c\/h3\u003e\n\u003cp\u003eMix SLP into 4.5 quarts potable water in large mixing vessel. Mixing should be done with a egg beater style mixing head and a heavy duty ½ inch drill. Mixing splines should be cleaned off between batches to avoid heavy buildup. SLP mix should be flowable and will pour onto the surface.\u003c\/p\u003e\n\u003ch3\u003ePLACING Self Leveling Polishable Cement Coating:\u003c\/h3\u003e\n\u003cp\u003eArrange work area to permit continuous placement without cold joints. For polished concrete toppings, place SLP at a minimum thickness of 3\/8 inch onto the prepared and primed substrate.\u003c\/p\u003e\n\u003cp\u003ePour or pump SLP onto the floor in a ribbon pattern and immediately spread it out with a gauge rake based on the need of the surface.\u003c\/p\u003e\n\u003cp\u003eIf planning to polish DO NOT use a spike roller.\u003c\/p\u003e\n\u003cp\u003eAfter achieving the desired depth, smooth the product surface with a smoother if within 10 minutes of placement. Do not overwork the material. Do not allow more than a few minutes to elapse between subsequent pours to prevent could joints.\u003c\/p\u003e\n\u003cp\u003eSLP will flow out and level for about 15 minutes. Using ice water will help extend your time. Once the bleed water is gone and the surface is dull, it may be retroweled for a more burnished look if you are planning that for a finish.\u003c\/p\u003e\n\u003cp\u003eAvoid conditions of extreme heat and wind. They cause rapid moisture loss from the surface which can result in crazing or micro cracking.\u003c\/p\u003e\n\u003cp\u003eGrinding and polishing can begin in 24 hours. SLP grinds very much like concrete. We recommend using Colloidal Tru Hard densifier (sold here) after the 200 grit stage and again after the 800 grit stage. Dilute densifier product 8-1 with water for best penetration. You can finish with Polish Guard (sold here) and burnish.\u003c\/p\u003e\n\u003cp\u003e50 lb bag will cover approximately 16 sq ft at 3\/8 inch\u003c\/p\u003e\n\u003cp\u003e\u003cimg sizes=\"(max-width: 400px) 100vw, 400px\" srcset=\"https:\/\/www.walttools.com\/wp-content\/uploads\/2016\/10\/prop_65_-_silica_-_sm.jpg 400w, https:\/\/www.walttools.com\/wp-content\/uploads\/2016\/10\/prop_65_-_silica_-_sm-300x124.jpg 300w\" height=\"165\" width=\"400\" alt=\"prop 65 - silica - sm.jpg\" src=\"https:\/\/www.walttools.com\/wp-content\/uploads\/2016\/10\/prop_65_-_silica_-_sm.jpg?width=700\" class=\"size-full wp-image-1749\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cdiv itemprop=\"articleBody\"\u003e\u003c\/div\u003e","brand":"Walttools","offers":[{"title":"Default Title","offer_id":46517650784313,"sku":"kcg1789529463865","price":24.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/9888\/6713\/files\/concrete-overlay---self-leveling-polishable-cement-coating_1.jpg?v=1789529468","url":"https:\/\/tonalstylingoutfit.shop\/products\/concrete-overlay-self-leveling-polishable-cement-coating","provider":"My Store","version":"1.0","type":"link"}