{"product_id":"concrete-sink-mold-sdp-28-oval-small-155x10x475","title":"Concrete Sink Mold SDP-28 Oval Small (15.5\"x10\"x4.75\")","description":"\u003ch2\u003eConcrete Sink Mold SDP-28 Oval Small (15.5\"x10\"x4.75\")\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe 'Small Oval' Sink Mold for concrete sink fabrication.\u003c\/li\u003e\n\u003cli\u003eA small oval shaped design for simplicity and where small size is needed.\u003c\/li\u003e\n\u003cli\u003eSmall style drain for bathroom lavatory size drains. Each Sink Mold comes with a reusable rubber drain plug 1.5\" tall and tapered from 1-5\/8\"to 1-7\/8\".(you will want to secure this plug with silicone to your sink mold before use, small side should ideally be stuck to the sink mold). \n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePlease note: some metal drain hardware is a larger diameter than 1-5\/8\" please be sure to check the drain you're going to use for clearance and if you need a larger diameter hole in the concrete then you may consider using something else like a piece of foam to create plug hole.\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003eCreate a seamless integral concrete sink and counter top, or form around to create a vessel sink.\u003c\/li\u003e\n\u003cli\u003eAll our molds have Lifetime Guarantee against defect. This Guarantee does not cover misuse of the Molds (Dropping the Mold, Prying the Mold out using a screwdriver, Driving onto it with a truck tire... etc.).\u003c\/li\u003e\n\u003cli\u003eExpressions LTD will not be held liable for any damage, misuse, or collateral damages resulting from use of any of our products. If there is a flaw or defect with a product, we will fix or replace the product.\u003c\/li\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecificaitons- Concrete Sink Mold SDP-28 Oval Small (15.5\"x10\"x4.75\"):\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 15 1\/2\"  (Across)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWidth:  10\"  (Front-To-Back)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDepth: 4 3\/4\"  (At Drain)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSides have at least a 5° slope to ensure Mold removal from concrete\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMold Use:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWatch videos of Mold Setup, Casting, and De-Molding\/Removal on our YouTube Video Page.\u003c\/li\u003e\n\u003cli\u003eA basic Sink Mold Instruction sheet is available here.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMold Setup:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWhen planning, remember to add 1\" - 2\" to each side of the sink to your measurements, to account for the concrete thickness on the sides of the finished sink.\u003c\/li\u003e\n\u003cli\u003eOptional- Rubber molds don't 'need' to be waxed, but it can help to make removal easier.  To wax the mold, apply 2-3 coats of Mold Release Wax to the mold, lightly buffing between coats once it hazes.\u003c\/li\u003e\n\u003cli\u003eApply small amounts of silicone to the Mold's bottom, and set in place in your form. Allow silicone to dry.\u003c\/li\u003e\n\u003cli\u003eScrews can be used to secure the Mold if necessary. Using screws of the appropriate length, screw through the bottom of the form, up into the bottom of the Sink Mold.\u003c\/li\u003e\n\u003cli\u003eRun a smooth silicone bead around perimeter of the Sink Mold, where it meets the form base (using a tool such as our Caulking Ball Tool makes this process very clean and easy). \u003c\/li\u003e\n\u003cli\u003eApply a thin coat of Rubber Safe Form Release to the Mold just prior to casting the concrete piece.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConcrete Casting: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVarious methods can be used to cast the concrete piece. View our Concrete Recipe section for tips on concrete mixes.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGFRC: Cement and fiberglass is sprayed on and hand packed into the form and around the Mold.\u003c\/li\u003e\n\u003cli\u003eWetcast: Oatmeal consistency concrete is placed in form and around the Mold and vibrated. A simple box should be built around the Sink Mold, to contain the concrete during this process.\u003c\/li\u003e\n\u003cli\u003eHand Packed: A drier concrete mix is hand packed into the form and around the Mold. A second step after de-molding will fill the voids with cement slurry, usually of a different coloring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eAny voids in the finished concrete can be filled using a Cement Slurry.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eMix your own slurry by mixing Portland cement, Cenospheres, and water (or water\/Polymer mix).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMold Removal:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/gwVjK529jLw\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf the steps above were followed for the Mold Setup, then most Molds will usually pull out of the concrete with little effort.\u003c\/li\u003e\n\u003cli\u003eIf the mold is difficult to remove, try:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCompressed air shot around the Mold rim will break the suction holding the Mold in the concrete.\u003c\/li\u003e\n\u003cli\u003eMost Molds can be pushed out of the concrete by removing the drain piece, and pushing the Mold out through the drain slot.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eClean-up and Care of The Concrete Sink Mold SDP-28 Oval Small (15.5\"x10\"x4.75\"):\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean Mold with a sponge after each use. Any dried cement residue can be removed with a scotch-brite pad (as outlined above in the Mold Setup section. A light muriatic acid wash (20:1, 20 parts water to 1 part muriatic acid) can also remove cement scale.\u003c\/li\u003e\n\u003cli\u003eWaxing and buffing the Mold after cleaning it use is recommended to protect the Mold until its next use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"ProductDetail_ExtInfo_div\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e","brand":"PNL Liners","offers":[{"title":"Default Title","offer_id":46517455421497,"sku":"ino1789526490053","price":128.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/9888\/6713\/files\/concrete-sink-mold-sdp-28-oval-small-155x10x475_1.jpg?v=1789526493","url":"https:\/\/tonalstylingoutfit.shop\/products\/concrete-sink-mold-sdp-28-oval-small-155x10x475","provider":"My Store","version":"1.0","type":"link"}